Testing Your Heater

Testing Spray


1. To test the heater, use our non-flammable thermostat testing spray.


2. Locate the thermostats at the end of the heater.


3. Give a very short blast to each thermostat of approximately 1/2 to 1 second.


4. Allow approximately 15 seconds for the heater to turn on. 


5. The heater will automatically turn off after 1 to 3 minutes if the temperature

         is above the set-point of your thermostat. 



DesignStein, LLC

4020 Sul Ross St.

San Angelo, TX 76904